Question 1

Why should i choose Methanol Performance instead of others?

Accepted Answer

Methanol Performance using high quality products. Our brushless high rpm pumps, unique controllers, high flow fittings and hypersonic nozzles will give you the best performance and reliability.

Question 2

Do you offer any warranty?

Accepted Answer

All parts comes with 1 year limited warranty. However electronic products must be inspected in house as we test them before packing.

Question 3

What nozzle should i choose?

Accepted Answer

We have a nozzle table to help you choose the correct size with your kit.
However, this table based in 50/50 fluids and most people using different kind of fluids or mixtures. Also this can be adjusted from pump RPM or Pressure as both can be adjusted from screw on top of the pump
and voltage going to the pump.

Question 4

How should i get the right kit for me?

Accepted Answer

We offer a few kits with different type of lines, pumps and controllers.
However we mostly do custom kits. So if you mail us what you need to do, we will offer a custom single, dual or direct port kit for best performance.

Question 5

What fluid should i take?

Accepted Answer

Best fluid tested by us right now is our true MP50/50 which doesn't need prefilters due to clean fluids.
Actually is better than others as we are making them based on weight and not based on capacity. The deionized water we use, has been processed from high standards machine which giving us good conductivity and pure water combined with 99.9% pure methanol for the best result. We have seen without additional tuning 5% power gain compared to other brands.
Not suggested running more than 60/40 meth/water as would be dangerous for number of reasons.

Question 6

What is your online remote support?

Accepted Answer

Our unique OBD controller is built with wi-fi so our techs can remotely connect with you and upload updates, help you with calibration tables or other adjustements. However due to high load of work an appointment have to be arranged. We always first trying to help you by mail as remote support needs more time.

Question 7

Where should i mount my pump and tank?

Accepted Answer

Ideal is to mount pump 30-60cm from away from the tank but certainly have to be mounted in lower point than the tank and nozzle to be higher than the tank, otherwise must be use our SS solenoid.
Also all lines and parts must be as far as possible from exhaust heat.

Question 8

How much power i can expect?

Accepted Answer

Using our kit and fluid we have seen about 25% power gain in high boost applications and 10% in Naturally aspirated engines.
Due to our water/methanol mixture, engine runs cooler, tuning can be much more aggresive, timing can be advanced in more degrees and reach higher boost with air fuel ratio over 12:1.

FAQ

Frequently asked questions